Roland R-1 User Manual

Page 16

The R-1’s controls and connectors

fig.panel-3

Power switch

This turns the power on/off.
Do not turn off the power during playback or recording. You must make sure that
playback or recording is stopped before you turn off the power.

• If you accidentally turn off the power during recording, the data being recorded will

not be saved to the CompactFlash card.

• The CompactFlash card may be damaged if you turn off the R-1’s power while data is

being read or written, such as during playback or recording.

• If you turn off the R-1’s power while the “Now working...” indication is shown during

effect editing or while saving a setting you’ve changed, the R-1 will become unstable,
and may become unable to start up.
Be very careful to never turn off the power when the unit is in such states.

AC adaptor jack

Connect the included AC adaptor to this jack.

HOLD switch

If you set the

HOLD switch

to the ON position, button presses on the R-1 will be

disabled; this is a convenient way to prevent the R-1 from being operated accidentally.
However, even when the

HOLD switch

is ON, the

mic type select switch

input

volume

power switch

and

output volume

will still be operable.

Output volume

This adjusts the volume that is sent from the

headphone/line output/digital

output jack

. However, the volume of the digital output is not adjustable.

Headphone/line output/digital output jack

This jack outputs audio from the R-1 to headphones or external speakers. If you want to
output a digital signal, use a round optical mini-type digital cable.

Eject button

Press this to eject the CompactFlash card inserted in the

memory card slot

Memory card slot

Insert a CompactFlash card into this slot.
CompactFlash is the only type of memory card that the R-1 can use.

R-1_egfis1.book 16 ページ２００５年１１月１１日　金曜日　午後５時１３分