beautypg.com

Selecting music styles, Selecting an internal style – Roland KR111 User Manual

Page 22

background image

Playing with accompaniment (Arranger)

20

r

KR111 Digital Intelligent Piano

If you press [To¥Variation], however, while the
ORIGINAL pattern is being played, the Arranger first
plays a (different) fill-in, and then switches to the
VARIATION pattern.

INTRO and ENDING

While the ORIGINAL and VARIATION patterns keep
repeating the same accompaniment until you select
another one or until you stop Arranger playback, Fill-
Ins (see above), Intros and Endings are played only
once.

INTRO patterns are introductions, i.e. short phrases
that set the tone for the piece you are about to play.

(1) Stop the Arranger and press the [Intro÷Ending] but-

ton (its indicator flashes).
You will now hear the introduction of the selected
Music Style. Once the INTRO pattern is finished, the
Arranger automatically proceeds with the ORIGINAL
or VARIATION pattern (depending on which of these
two indicators flashes).

Note: If the SYNC START function is on, pressing
[Intro÷Ending] only selects the INTRO pattern. Style playback
needs to be started by playing a chord in the left half of the
keyboard. If the SYNC START function is off, however, play-
back is started as soon as you press the [Intro/Ending] but-
ton.

Here is how to add a musical closing section to your
performance:

(2) Press the [Intro÷Ending] button (its indicator lights).

The KR111 now plays an ENDING phrase. At the end
of the ENDING pattern, the Arranger stops.

As soon as you feel comfortable with the Arranger,
you should try to play a melody with your right hand
while using your left for specifying Arranger chords.

Selecting Music Styles

The KR111 provides three memory areas for Music
Styles:

• POP/ROCK, BALLAD/ACOUSTIC,

OLDIES/COUNTRY, BIG BAND/SWING,
LATIN/GOSPEL, TRAD/KIDS. These are the
Style families in the KR111’s internal ROM memory.
These Styles cannot be erased (but you can modify
them in realtime using the Style Orchestrator func-
tions, see 21).

• USR: This is where a Music Style loaded from a

floppy disk (MSA, MSD and MSE series, optional) is
temporarily stored. The data in this RAM memory are
erased when you switch off the KR111.

• DISK: (D01~…) This area refers to a floppy disk you

inserted into the KR111’s drive. The number of avail-
able Styles depends on the floppy disk, of course. The
Style you select is transferred to the KR111’s USR
memory (see above), which is why it takes a little
longer before you can use it.

Selecting an internal Style

(1) Press the [Arranger] button.

The

icon appears in the display.

(2) If you want to use a style on floppy disk, insert the

disk into the drive.

(3) Press one of the “Music Style” buttons.

Note: The family names do not appear in the display, so be
sure to check which Music Style indicator lights.

(4) Use [+][–] to specify the desired Style within the

selected family.
The first Music Style within the selected group is
selected automatically. So if you need the first Style,
there is no need to press [+]. You must use [+] or [–],
however, to select another Style within the same
group.

However, the KR111 memorizes your selection within
each family and returns to the last-selected Style
whenever you press a Music Style button.

Note: The [+][–] buttons do not allow you to go from one
family to the previous or next.

Working with the [+][–] buttons

You can press [+] or [–] either repeatedly (brief
presses) to go back or advance in single units, or
hold down [+] (or [–]) to quickly select a memory.
The fastest way to scroll through the available
memories is by holding down [–] while pressing
[+] (go backwards), or by holding down [+] while
pressing [–] (advance).

SYNC START

Tempo

Marker

Music Style

User

Trad
Kids

Latin

Gospel

Intro

Ending

Start

Stop

Big Band

Swing

Ballad

Acoustic

Oldies

Country

Pop

Rock

Fill In

Sync

To Original

To Variation

Count Metronome

Song

Music

Assistant