Nortel Networks COOLPIX P7000 - Manual (Page 60)

46
Selecting Scenes for Shooting (Scene Mode)
More on
Sh
ooting
Shooting in the Scene Selected by the Camera (Scene Auto
Selector)
By simply framing a picture, the camera automatically selects the optimum scene
mode for simpler shooting. When the camera is aimed at a subject in x Scene
auto selector mode, the camera automatically selects one of the following scene
modes.
1
Rotate the mode dial to
y.
2
Press the
d button to display
the scene menu, choose x Scene
auto selector with the rotary multi
selector and press the
k button.
• Scene auto selector is enabled.
• When the built-in flash is not raised, the
message The flash is lowered. is
displayed.
• Press the K (flash pop-up) button to raise the built-in flash.
3
Frame the subject and take the picture.
• When the camera automatically selects a scene mode,
the shooting mode icon changes to that for the scene
mode currently enabled.
• Press the shutter-release button halfway to set the focus and exposure. When the
subject is in focus, the focus area (active focus area) lights in green.
• Press the shutter-release button the rest of the way down to take the picture.
• Auto (general shooting) • Night landscape ( A51)
• Portrait (
A48)
• Close-up (
A52)
• Landscape (
A48)
• Backlighting (
A55)
• Night portrait (
A49)
d: Auto mode g: Night landscape
e: Portrait i: Close-up
f: Landscape j: Backlighting
h: Night portrait
Scene menu
Scene auto selector
Portrait
Landscape
Sports
Night portrait
Party/indoor
Beach
1/250 1/250 1/250 1342 1342 1342 F5.6 F5.6 F5.6