Nortel Networks COOLPIX P7000 - Manual (Page 36)

22
First Ste
p
s
Inserting the Memory Card
The recorded data is stored in the camera’s internal memory (approx. 79 MB) or on
commercially available Secure Digital (SD) memory cards (
A221).
If a memory card is inserted in the camera, data is automatically stored on the
memory card, and data recorded to the memory card can be played back,
deleted, or transferred. To use the internal memory, remove the memory
card.
1
Confirm that the power-on lamp and the
monitor are turned off and open the battery-
chamber/memory card slot cover.
• Be sure to turn off the camera before opening the
battery-chamber/memory card slot cover.
2
Insert the memory card.
• Slide the memory card in correctly as
shown on the right, until it clicks into
place.
• Close the battery-chamber/memory
card slot cover after inserting the
memory card.
B
Inserting the Memory Card Correctly
Inserting the memory card upside down or backwards could damage the camera or
the memory card. Be sure to confirm that the memory card is in the correct orientation.
Removing the Memory Card
Before opening the battery-chamber/memory card slot
cover, turn the camera off and confirm that the power-
on lamp and the monitor are off.
Press the memory card in lightly with your finger (1) to
partially eject it, and then pull it out straight (2).
• Note that the battery or memory card may become
hot during use; observe due caution when removing
the battery.