Nortel Networks COOLPIX P7000 - Manual (Page 184)

170
Setup Menu
Basi
c Came
ra Setup
Date
Set the camera’s internal clock.
Setting the Travel Destination Time Zone
1
Use the rotary multi selector to choose Time
zone and press the
k button.
• The Time zone screen is displayed.
2
Choose x Travel destination and press the
k button.
• The date and time displayed on the monitor change
according to the region currently selected.
Press the d button M z (Setup menu) (A168) M Date
Date
Set the camera clock to the current date and time.
Use the rotary multi selector to set the date and time.
• Choose an item: Press
K or J (selected in the
following order: D (day)
➝ M (month) ➝ Y (year) ➝
hour
➝ minute ➝ DMY (date display order)).
• Set the contents: Rotate the rotary multi selector, or
press H or I.
• Finish setting: Finally, choose DMY, and apply the
selection by pressing the k button or K (A21).
Time zone
w (home time zone) can be specified and daylight saving can be enabled or
disabled.
When x (travel destination) is registered, the time difference (
A172) from the w
(home time zone) is automatically calculated and the local date and time are
recorded. Useful when traveling.
Date
2010 11 15
15 10
Y M D
Edit
DMY (date display order)
15:30
Date
Date
Time zone
15/11/2010
15:30
Time zone
Home time zone
Travel destination
15/11/2010
London, Casablanca