Basic photography and playback: auto mode, Step 1 turn the camera on and select auto mode, Basic photography and playback: a (auto) mode – Nortel Networks COOLPIX P7000 User Manual
Page 38: Step 1 turn the camera on and select a (auto) mode, Press the power switch to turn on the camera, Rotate the mode dial to a
24
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
M
o
de
Basic Photography and Playback: A (Auto) Mode
Step
1 Turn the Camera On and Select A (Auto) Mode
This section describes how to take pictures in A (auto) mode, an automatic, “point-
and-shoot” mode recommended for first-time users of digital cameras.
1
Press the power switch to turn on the camera.
• The lens extends, and the monitor is turned on.
2
Rotate the mode dial
to A.
3
Check the battery level and number of
exposures remaining on the monitor.
Battery Level
Number of Exposures Remaining
The number of exposures remaining is displayed.
The number of pictures that can be stored depends on the remaining capacity of the
internal memory or memory card, the image quality, and the image size (
A71).
Monitor
Description
(NO
INDICATOR)
Battery fully charged.
B (lights)
Battery level low; prepare to charge or
replace the battery.
N
Battery
exhausted.
Cannot shoot. Recharge or replace with
a fully-charged battery.
1/250
1/250
1/250
32
32
32
F5.6
F5.6
F5.6
1/250
1/250
1/250
32
32
32
F5.6
F5.6
F5.6
Battery level indicator
Number of exposures
remaining