Nortel Networks COOLPIX P7000 - Manual (Page 126)

112
More on
Sh
ooting
E, F and N (User Setting Modes)
Up to three setting combinations that are frequently used for shooting (user
settings) can be saved in
E, F and N. The saved settings can be immediately
retrieved for shooting simply by rotating the mode dial to
E, F or N. This is
convenient when you want to shoot with these settings, or you only want to
slightly change the settings. Shooting is possible in
A (Programmed auto), B
(Shutter-priority auto),
C (Aperture-priority auto) and D (Manual). The following
settings can be saved in E, F or N.
Specialized Menu for E, F or N
Quick Menu
Shooting Menu
1 Choose the standard shooting mode (default setting is A). The current flexible program (when set
to A), shutter speed (when set to B or D) or aperture value (when set to C or D) settings are also
saved.
2 Set the zoom position for when the mode dial is set. Choose
28 mm (default setting), 35 mm, 50
mm,
85 mm, 105 mm, 135 mm, 200 mm or Current zoom position.
3 This setting is not applied to the setup menu settings.
4 Set the information displayed on the monitor when the mode dial is set (default setting is Show
info).
5 The current focus distance is also saved when the focus mode is E (manual focus).
6 The current focus area position is saved when AF area mode is set to Manual.
7 The preset value for preset manual applies to the
A, B, C, D, E, F and N shooting modes.
Shooting mode
( A60) 1
Focal length (35mm equiv.)
2
Photo info
( A173) 3
Initial monitor display
(
A14) 4
Flash mode
(
A32)
Focus mode
(
A40) 5
AF area mode
( A84) 6
AF assist
( A177) 3
Image quality
( A68)
Image size
( A70)
ISO sensitivity
( A74)
White balance
(
A76) 7
Auto bracketing
(
A80)
Picture Control
( A92)
Metering
( A98)
Continuous
( A99)
Autofocus mode
( A102)
Flash exp. comp.
( A102)
Noise reduction filter
( A103)
Long exposure NR
(
A103)
Distortion control
(
A104)
Wide-angle converter
(
A104)
Flash control
( A105)
Active D-Lighting
( A106)
Zoom memory
( A107)