Nortel Networks COOLPIX P7000 - Manual (Page 192)

178
Setup Menu
Basi
c Came
ra Setup
Digital Zoom
Enable or disable the digital zoom.
B
Notes on Digital Zoom
• When the digital zoom is in effect, AF area mode is set to Center (spot) ( A84).
• Digital zoom cannot be used in the following situations.
- When the focus mode ( A40) is set to E (manual focus)
- When Subject tracking is selected for AF area mode ( A84)
- When Smile timer is set
- When Scene auto selector, Portrait or Night portrait is selected in scene mode
- When NRW (RAW), NRW (RAW) + Fine, NRW (RAW) + Normal or NRW (RAW) + Basic is
selected for Image quality ( A68)
- When Multi-shot
16 is selected for the Continuous (A99) setting
- When Wide-angle converter ( A104) is set to On
• At magnifications of 1.2× to 1.8×, Metering is set to Center-weighted, and at magnifications of
2.0× to 4.0×, it is set to Spot.
Press the d button M z (Setup menu) (A168) M Digital zoom
On (default setting)
When the camera is zoomed in to the maximum optical zoom position, rotating and
holding the zoom control at
g (i) triggers the digital zoom (A27).
Crop
Limit zoom magnification up to the position of V (except when recording a movie).
Also limit the digital zoom to the range at which image quality of the shot still picture
does not deteriorate.
The digital zoom is not available when Image size is M
3648×2736, E 3264×2448,
I 3648×2432, z 3584×2016 or H 2736×2736.
Off
The digital zoom is not activated (except when recording a movie).