beautypg.com

Nortel Networks COOLPIX P7000 User Manual

Page 225

background image

211

Troubleshooting

T

e

ch

n

ical
No

te

s an

d I
n

de
x

Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear on the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a strong
external static charge. Turn the camera off, remove and replace the battery, then turn the
camera on again. Note that disconnecting the power source as described above may
result in the loss of any data not recorded on the internal memory or memory card at the
time the problem occurred. Data already recorded is not affected. In the event of
continued malfunction, contact your retailer or Nikon-authorized service representative.

Date not
appearing on
pictures even
when Date
imprint
is
enabled.

A shooting mode that does not support date imprint is

selected.

Another function that is set now is restricting the date

imprinting.

The date cannot be imprinted onto a movie.

174

174

-

Camera settings
reset.

Clock battery is exhausted; all settings were restored to their
default values.

171

Reset file
numbering

cannot be done.

• Reset file numbering cannot be applied when the

folder number reaches 999 and there are images in the
folder. Change the memory card, or format the internal
memory/memory card.

• Reset file numbering cannot be set when the scene

mode is set to Panorama assist, or when the shooting
mode is

A, B, C, D, E, F or N and Intvl timer

shooting is chosen for Continuous in the shooting
menu.

188, 203

55, 99, 188, 203

Monitor is turned
off, and the power-
on lamp blinks
rapidly.

Battery temperature is high. Turn off camera, and allow
battery to cool down before resuming use. After the lamp
blinks for three minutes, the camera turns off automatically,
but you can also press the power switch to turn it off
manually.

19

Camera
temperature rises.

When functions such as movie recording are used for a long
time, or when the camera is used in a location with a high
ambient temperature, the camera temperature may rise. This
is not a malfunction.

147

Problem

Cause/Solution

A