Nortel Networks COOLPIX P7000 - Manual (Page 116)

102
Shooting Options: Shooting Menu ( A, B, C, D Modes)
More on
Sh
ooting
Autofocus Mode
Choose how the camera focuses.
C
Note on Autofocus Mode
This feature cannot be used simultaneously with certain features. See “Functions that Cannot be
Applied Simultaneously” (
A108) for more information.
Flash Exp. Comp.
Flash compensation is used to adjust the flash output by ±2.0 EV in increments of
1/3 EV, changing the brightness of the main subject relative to the background.
At settings other than
0.0, the icon for the current setting is displayed on the
monitor ( A6).
C
Flash Exp. Comp. in Low Noise Night Mode
Flash exp. comp. can be set even in low noise night mode ( A59). This setting is stored in the
camera’s memory independently and is not linked to Flash exp. comp. in shooting modes A, B, C
and D.
Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Autofocus mode
A Single AF (default setting)
The camera focuses only when the shutter-release button is pressed halfway.
B Full-time AF
The camera focuses continuously until the shutter-release button is pressed down
halfway. Use with moving subjects. A sound will be heard while the camera focuses.
Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Flash exp. comp.
-0.3 to -2.0
The flash output is reduced from –0.3 to –2.0 EV, in increments of 1/3 EV, to prevent
unwanted highlights or reflections.
0.0 (default setting)
The flash output is not adjusted.
+0.3 to +2.0
The flash output is increased from +0.3 to +2.0 EV, in increments of 1/3 EV, to make
the main subject of the frame appear brighter.