Nortel Networks COOLPIX P7000 - Manual (Page 195)

181
Setup Menu
Basi
c Came
ra Setup
Auto Off
If no operations are performed for a certain period while the camera is on, the
monitor is turned off to save power and the camera enters standby mode (
A19).
In this menu, set the time before the camera enters standby mode.
Choose from 30 s, 1 min (default setting), 5 min and 30 min.
C
When the Monitor Is Turned Off to Save Power
• The power-on lamp blinks in standby mode.
• The camera turns off when the standby mode continues for about three minutes.
• When the power-on lamp blinks, turn on the monitor again with one of the following operations.
- Press the power switch, shutter-release button or the c button.
- Rotate the mode dial.
B
Auto Off Setting
In the following situations, the time taken for the camera to enter standby mode is fixed.
• When menus are displayed: three minutes
• When tone level information is displayed (shooting mode): three minutes
• During slideshow playback: maximum of 30 minutes
• When the AC adapter EH-5a is connected: 30 minutes
Press the d button M z (Setup menu) (A168) M Auto off