Nortel Networks COOLPIX P7000 - Manual (Page 185)

171
Setup Menu
Basi
c Came
ra Setup
3
Press
K.
• The time zone selection screen is displayed.
4
Press
J or K to choose the travel destination
(Time zone).
• The time difference between home and the travel
destination is displayed.
• When using the camera in an area where daylight
saving time is in effect, turn on the daylight saving
setting with
H. When set to on, the W icon is displayed
and the clock advances by one hour. To turn off, press
I.
• Press the k button to register the travel destination
time zone.
• While the travel destination time zone is selected, the
Z icon is displayed on the monitor when the camera is
in shooting mode.
B
The Clock Battery
The camera’s internal clock uses a different battery from the camera’s battery. The clock battery
charges when the main battery is installed or the AC adapter is connected, and provides several days
of clock battery power after about ten hours of charging.
C
w (Home time zone)
• To switch to the home time zone, choose w Home time zone in step 2 and press the k button.
• To change the home time zone, choose w Home time zone in step 2 and perform the same
procedure as for x Travel destination to set the home time zone.
C
Daylight Saving Time
When daylight saving time starts or ends, turn on or off the daylight saving time option from the time
zone selection screen displayed in step 4.
D
Imprinting the Date on Pictures while Shooting
After setting the date and time, set the Date imprint setting in the setup menu ( A174). Once Date
imprint is set, the shooting date and time can be imprinted on the pictures.
15:30
Time zone
Home time zone
Travel destination
15/11/2010
London, Casablanca
EST:New York
Toronto, Lima
Time zone
Home time zone
Travel destination
15/11/2010 10:30
EST:
New York
Toronto
Lima
Back
10:30 -5:00
Time difference