Nortel Networks COOLPIX P7000 - Manual (Page 39)

25
Step 1 Turn the Camera On and Select A (Auto) Mode
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
M
o
de
Indicators Displayed in A (Auto) Mode
To turn on the monitor in the power save standby mode, press the power switch or
shutter-release button (
A181).
C
Note on the Flash
When the built-in flash is lowered, the flash setting is fixed to off and W appears at the top of the
monitor. In situations where a flash is needed, such as in dark locations or when the subject is backlit,
be sure to raise the built-in flash (
A33).
C
Functions Available in A (Auto) Mode
• Focus mode ( A40) and exposure compensation (A43) can be applied and pictures can be taken
using the flash mode ( A32) and self-timer (A35).
• The image quality/image size can be changed by rotating the quick menu dial to a and pressing
the quick menu button ( A68).
D
Vibration Reduction
• See Vibration reduction ( A175) in the setup menu (A167) for more information.
• Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
1/250 1/250 F5.6 F5.6 32 32 32
Internal memory indicator
Pictures are recorded to internal memory
(approx. 79 MB). When a memory card is
inserted, C is not displayed and pictures are
recorded to the memory card.
Aperture value ( A61)
Shutter speed
(
A61)
Shooting mode
A is displayed in
A (auto) mode. Vibration reduction icon
Reduces the effects of
camera shake.
Image quality/image size
The current image quality
(compression) and image size
are displayed. The default
settings are W (Normal) for
image quality and J (3648 ×
2736) for image size.