Nortel Networks COOLPIX P7000 - Manual (Page 119)

105
Shooting Options: Shooting Menu ( A, B, C, D Modes)
More on
Sh
ooting
B
Notes on the Wide-angle Converter for Shooting
• Set Wide-angle converter to On before shooting. Set Wide-angle converter to None when no
converter lens is attached.
• The built-in flash is changed to W (Off) when Wide-angle converter is set to On. Use flash units
( A202) (available separately from Nikon) to shoot with the flash.
• Using the flash units (available separately from Nikon) may darken the peripheral area of the
picture. Check the picture using the monitor after shooting. A wide panel is recommended when
shooting with the Speedlight SB-600 or SB-900.
• AF Assist illuminator cannot be used when Wide-angle converter is set to On.
• This feature cannot be used simultaneously with certain features. See “Functions that Cannot be
Applied Simultaneously” ( A108) for more information.
C
Installing and Removing the Lens Ring
• Before attaching the wide-angle converter,
remove the lens ring. Before installing or
removing the lens ring, be sure to turn off
the camera. While pressing the lens ring
release button, rotate the lens ring
clockwise and remove it.
• To attach the lens ring to the camera, align
the lens ring mounting index (white dot)
with the lens ring release button, and then
rotate the lens ring counterclockwise.
• When not using the wide-angle converter, be sure to attach the lens ring onto the camera.
• For more information on attaching the wide-angle converter, see the user’s manual provided with
the wide-angle converter.
Flash Control
You can set the built-in flash to off even when you are not using a Speedlight
(external flash unit) (
A202) mounted on the camera’s accessory shoe.
B
Note on Flash Control
This feature cannot be used simultaneously with certain features. See “Functions that Cannot be
Applied Simultaneously” (
A108) for more information.
Set to A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Flash control
a Auto (default setting)
When a flash unit is mounted, the flash unit fires. When a flash unit is not used, the
built-in flash fires.
k
Built-in off
The built-in flash is disabled.
Lens ring release button