beautypg.com

Continuous, A99), A99) can b – Nortel Networks COOLPIX P7000 User Manual

Page 113

background image

99

Shooting Options: Shooting Menu (

A, B, C, D Modes)

More on

Sh
ooting

Continuous

Change the settings for continuous shooting and BSS (Best Shot Selector).

The continuous mode setting is displayed on the monitor during shooting (

A6).

Nothing is displayed for Single.

Set to

A, B, C or D M d M A, B, C, D (shooting menu) (A91) M Continuous

U Single (default setting)

One image is shot each time the shutter-release button is pressed.

V Continuous

While the shutter-release button is fully held down, up to 45 pictures are shot at a rate
of about 1.3 frames per second (fps) when Image quality is set to Normal and Image size
is set to M

3648×2736.

D BSS (Best Shot Selector)

BSS is recommended for shooting under low lighting without the flash, with the camera
zoomed in, or in other situations in which camera shake is likely to blur pictures.
The camera takes up to ten images while the shutter-release button is fully held down. The
sharpest image (image with the most details) in the series is automatically selected and saved.

Y Continuous flash

While the shutter-release button is fully held down, continuous shooting is performed
using the built-in flash (approximately 3 frames continuously at a rate of about 1.2
frames per second when Image quality is set to Normal and Image size is set to
M

3648×2736).

The camera charges the built-in flash once continuous shooting ends. No shooting can
be performed until the charging ends. Because the ISO sensitivity is raised during
shooting, pictures may be affected by noise.

W Multi-shot 16

Each time the shutter-release button is fully pressed, the camera
shoots 16 pictures at a rate of about 30 frames per second and
arranges them in a single picture.
The Image quality for recording is fixed to Normal and the

Image size is fixed to D (2560×1920 pixels).

The digital zoom is not available.

X Intvl timer shooting

The camera shoots still pictures automatically at the specified interval (

A100).