Inserting the battery – Nortel Networks COOLPIX P7000 User Manual
Page 32
18
First Ste
p
s
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL14 (supplied) into the camera.
• Charge the battery before first use or when the battery is running low (
1
Open the battery-chamber/memory card
slot cover.
• Slide the cover latch to the
Y side (1), and open
the cover (2).
2
Insert the battery (supplied).
• Confirm that the positive (+) and
negative (–) terminals are
oriented correctly, as shown on
the label at the entrance of the
battery chamber, and insert the
battery.
• Use the battery to push the
orange battery latch in the
direction shown (1), and fully
insert the battery (2).
• When the battery is fully inserted, the battery latch locks it in place.
B
Inserting the Battery Correctly
Inserting the battery upside down or backwards could damage the camera. Be
sure to confirm that the battery is in the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
• Close the cover (1), and slide the cover latch to the
Z
position (2).
Battery chamber