Nortel Networks Modular ICS 4.0 - Manual (Page 58)

46 / Answering calls
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
2. Press
©. The telephone’s internal microphone
and speaker are automatically turned on.
Handsfree is not available for an M7100 telephone.
Making calls without lifting the receiver
1. Press
©. (If you don’t have a prime line assigned
to your telephone, press a line button.)
The telephone’s internal microphone and speaker are
automatically turned on.
2. Dial your call.
3. Speak normally.
Muting Handsfree
1. Press
© to switch off the telephone microphone
so that you can speak privately to someone in your office
while you are on a handsfree call.
2. Press
© to turn the microphone back on again and
continue your handsfree call.
Changing a regular call to handsfree
1. Press
©.
2. Hang up the receiver.
Changing a handsfree to a regular call
Lift the receiver.
Tip -
Direct your voice toward the telephone. The closer
you are to the telephone, the easier it is for the
microphone to transmit your voice clearly to your listener.
p0881591.book Page 46 Wednesday, August 19, 1998 6:43 PM