Changing call log options, Changing how calls are dialed, Changing the language used on the display – Nortel Networks Modular ICS 4.0 User Manual

Page 143

User Preferences / 131

P0881591 Issue 01

Modular ICS 4.0 System Coordinator Guide

7. Press

‘ and choose the line (or enter a code for a

line pool) the speed dial code should use.

Use the line pool code to select a particular line pool for use
with Speed Dial. If you select Use routing tbl, a line or pool
is chosen by the routing programming according to the initial
digits in the number.

The route you choose for a User Speed Dial code must be one
that the telephone can use. For example, if the telephone does
not have access to Line Pool B and you use that pool code with
the speed dial code, the code does not work.

To change a system speed dial code, see “Adding or changing
a system speed dial” on page 17.

Changing Call Log options

1. Press

≠ at Call log opt’ns….

2. Press CHANGE until you see the option you want to use. See

“Call Log options” on page 108.

Changing how calls are dialed

1. Press

≠ at Dialing opt’ns….

2. Press CHANGE until you see the option you want to use.

Descriptions for dialing options are found on the

Telephone