Nortel Networks Modular ICS 4.0 - Manual (Page 31)

Frequently used programming operations / 19
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
If you assign a specific line to a system speed dial number, only telephones with
an appearance of that line can use the speed dial number.
Choose what shows up on the display
Program a name for a speed dial
The system has a standard name to display, so it is not necessary for you to
program one. However, if you have chosen not to display the telephone number,
you may want a specific name.
In this example, the system selects the prime line
automatically (the most common choice), to dial
speed dial code 01.
Press ‘ .
Your choices are Yes and No. Yes means the display
shows the telephone number. Press
CHANGE .
No means the display shows a name for the code.
Press ‘ .
Press ≠ .
This is the name the display shows if you don’t
change it. Press
CHANGE .
Decide the name you want to give to the speed dial
code.
Press the telephone’s numeric dial pad button that has the first letter of the
name until the display shows the letter you want.
Press --> .
Use prime line
CHANGE
Use prime line
CHANGE
Display digits:Y
CHANGE
Display digits:N
CHANGE
Display digits:N
CHANGE
Name:Sys Spd Di...
CHANGE
...al 01 ...
CHANGE
Name:___
-->
Name:S
BKSP -->
p0881591.book Page 19 Wednesday, August 19, 1998 6:43 PM