Changing set lock programming for a telephone, Using an auxiliary ringer – Nortel Networks Modular ICS 4.0 User Manual

Page 191

Using System features / 179

P0881591 Issue 01

Modular ICS 4.0 System Coordinator Guide

Changing Set Lock programming for a telephone

You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.

1. Press

ƒ••¤flfl‹››.

2. Press

¤‹fl›fl (the default System Coordinator

password).

3. Press

≠ at Terminals&Sets and enter the

internal number of the telephone you want to program.

4. Press

≠.

5. Press

‘ until the display reads Restrictions.

6. Press

≠ twice.

7. Press

‘ until the display reads Set lock.

8. Use CHANGE to select one of the three options: None,

Partial and Full.

Using an auxiliary ringer

An auxiliary ringer is a separate device that has to be
connected to Norstar.

Turning the auxiliary ringer for a telephone on or off