Nortel Networks Modular ICS 4.0 - Manual (Page 178)

166 / Using System features
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Turning Services on and off
The master control for how different services and their
schedules are used by your system is in programming. There
are three settings: Manual, Automatic and Off.
• Manual allows you to turn the service on and off at any
time from a control telephone using a feature code.
• Automatic allows you to use the preassigned stop and start
time for a service. You are able to start and stop the service
by entering the appropriate feature code at a control
telephone. If you select this setting, you use the start and
stop times programmed by your installer or customer
service representative.
• Off prevents the service from being activated.
You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.
1. Press
ƒ••¤flfl‹››.
2. Press
¤‹fl›fl (the default System Coordinator
password).
3. Press
‘ twice.
4. Press
≠ at Services.
5. Press
‘ until you see the Service you want to
program.
6. Press
≠ and ‘ until you see the
schedule you want to program.
7. Press
≠ and use CHANGE to select the setting that
works best for your office: Off, Manual or Automatic.
Each schedule can have its own configuration of a Service
which works independently of automatic start and stop times.
p0881591.book Page 166 Wednesday, August 19, 1998 6:43 PM