Nortel Networks Modular ICS 4.0 - Manual (Page 187)

Using System features / 175
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
You cannot forward calls to a direct-dial telephone that is
outside your Norstar system. See “Making changes to Call
Forward No Answer” on page 23.
Note: ISDN terminals cannot use the Direct-Dial digit to
reach a Direct-Dial set.
Changing the direct-dial telephone assignments
Your installer or customer service representative sets up the
direct-dial telephone.
You can change which direct-dial telephone a telephone is
assigned to, or assign it no direct-dial telephone.
You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.
1. Press
ƒ••¤flfl‹››.
2. Press
¤‹fl›fl (the default System Coordinator
password).
3. Press
≠ at Terminals&Sets.
4. Enter the internal number of the telephone you want to
program and press
≠. The display reads
Capabilities.
5. Press
≠.
6. Press
‘ until the display reads D-Dial.
7. Press CHANGE to select Set1, Set2, Set3, Set4, Set5 or
None.
p0881591.book Page 175 Wednesday, August 19, 1998 6:43 PM