Nortel Networks Modular ICS 4.0 - Manual (Page 109)

Communicating in the office / 97
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
4. Press
≠ twice.
5. Press
‘ six times. The display reads Page Zone.
6. Press CHANGE to select the setting: 1, 2, 3,4, 5, 6 or None.
You can make a telephone part of a page zone only if the
telephone has paging set to Y (Yes).
A zone is any set of Norstar telephones that you want to group
together for paging, regardless of their location. The
maximum number of sets in a page zone is 50.
Your installer programs whether a tone sounds before a page
begins, and the maximum number of seconds a page can last
before it is automatically turned off.
Displays
Tip -
Make sure that everyone who needs to make page
announcements has a list showing which telephones are
in which page zones.
Enter the desired page zone number (0- 6) or
press
ALL .
You have entered a page zone code that is
not between 0 and 6.
Select the type of page you want. See the list
in “Making a page announcement” on page
95.
The time allotted for paging has expired.
You are making a page. The display shows
the page zone you have chosen. Press
ƒ or ® when you are finished.
Enter zone:___
ALL
Invalid zone
Page choice:
SETS
SPKR BOTH
Page timeout
Paging ALL
p0881591.book Page 97 Wednesday, August 19, 1998 6:43 PM