Making changes to do not disturb on busy 26, Making changes to do not disturb on busy – Nortel Networks Modular ICS 4.0 User Manual
Page 38
26 / Frequently used programming operations
Modular ICS 4.0 System Coordinator Guide
P0881591 Issue 01
Making Changes to Do Not Disturb on Busy
When you are on a call and a second call comes in, your
telephone rings softly to alert you to the second call. You can turn
this feature on or off for each telephone.
Begin the programming session
Press
≠
.
Press
CHANGE
and enter the internal number where
you want the calls to be sent. In this example, it’s 221.
You can press
CLR
to change the destination back to
None
.
Press
®
to end your session.
You can press
‘
to continue programming capabilities for this
telephone, or press
–
three times to return to the Terminals and Sets
heading.
Tip -
If the Norstar set is a member of a Hunt Group, the
Call Forward on busy feature is overridden and the Hunt
Group call continues to ring until the hunt time has
expired. For more information on Hunt Groups see
“Programming Hunt Groups” on page 135.
Press
ƒ
.
Press
••¤flfl‹››
.
Fwd on busy. . .
Fwd to:None
CHANGE
Fwd to:221
CLR
CHANGE
End of session
Jan 1 12:00pm
Feature:
p0881591.book Page 26 Wednesday, August 19, 1998 6:43 PM