Nortel Networks Modular ICS 4.0 - Manual (Page 112)

100 / Communicating in the office
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
4. On analog telephones connected to an Analog Station
Module (ASM), the message waiting indicator is activated.
Canceling a message you have sent
1. Press
ƒ£⁄. The display reads Cancel for:.
2. Enter the internal number of the person to whom you sent
the message.
Viewing your messages
ƒflfi
You can receive up to four messages from different
telephones, including your voice message center. A single
message from your voice message center may pertain to
several voice messages.
On a telephone with a one-line display
1. Press
ƒflfi. The display shows the first
message.
2. Press
• or £ to move through your messages.
On a telephone with a two-line display
1. Press MSG. The display shows the first message you
received.
2. Press NEXT to move through your messages.
Replying to a message
You can call the person (or your voice message center) who
sent a message while you are viewing the message.
On a telephone with a one-line display
Press
‚.
On a telephone with a two-line display
Press CALL.
p0881591.book Page 100 Wednesday, August 19, 1998 6:43 PM