Nortel Networks Modular ICS 4.0 - Manual (Page 116)

104 / Communicating in the office
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Using Voice Call
ƒflfl
You can make an announcement or begin a conversation
through the speaker of another telephone in the system.
Making a Voice Call
Press
ƒflfl.
You have one or more messages and one or
more new Call Logs. Press
ƒ°‚fl to change the first line of
the display to the current time and date.
You have no line button free with which to
reply to a message.
There has been no number programmed for
the voice message center. Contact your
voice messaging service provider.
You are at the beginning of your list of
messages. Press
NEXT to move through your
messages.
You are trying to send a message to a user
whose message waiting list is full.
You have tried to send a message but your
telephone’s list of sent messages is full.
Cancel one of the messages you have sent,
if possible, or wait until you have received a
reply to one of those messages.
For other displays, see “Common feature displays” on page 203.
Tip -
Hunt Groups cannot accept voice calls. Answer
buttons have no appearances for voice calls, and the set
does not ring for voice calls. For more information on Hunt
Groups see “Programming Hunt Groups” on page 135.
For more information on Answer buttons see “Answer
buttons” on page 40.
Messages & Calls
MSG
CALLS
No button free
No number stored
Start of list
NEXT
Their list full
Your list full
p0881591.book Page 104 Wednesday, August 19, 1998 6:43 PM