Nortel Networks Modular ICS 4.0 - Manual (Page 122)

110 / Tracking your incoming calls
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Viewing a Call Log item
Press
√ or MORE to view the information for a call
log item.
Erasing log items
You should routinely erase log items that you’ve read, to make
space for new items in your log.
1. Display the item you want to erase.
2. Press
˙ or ERASE.
3. Press
® to exit.
If you accidentally erase an item, you can retrieve it.
1. Press
˙ or UNDO immediately after accidentally
erasing an item.
2. Press
® to exit.
Making a call using Call Log
You may find it helpful to place calls from within your Call
Log. The number stored for each call may vary depending on
the type of call. For example, if the call was placed from a
Centrex or PBX system, the first few numbers may need to be
trimmed before you can make the call. If the number you want
to call is long distance, or if you want to use a line pool, you
may need to add numbers.
To place a call:
1. Display the log item for the call you want to place.
2. Display the associated telephone number.
3. Press
√ or TRIM, once for every digit that you
want to remove.
4. Dial any extra digits required.
5. Press an external line or line pool button.
p0881591.book Page 110 Wednesday, August 19, 1998 6:43 PM