Nortel Networks Modular ICS 4.0 User Manual

Page 103

Forwarding your calls / 91

P0881591 Issue 01

Modular ICS 4.0 System Coordinator Guide

You have one external line on your
telephone, but you need a second line to
perform line redirection. Redirect your
external line using a line pool as the outgoing
line.

You are attempting to redirect a line and the
line you have chosen is the outgoing line you
have selected as a destination. You cannot
redirect a line to itself. Select another line.

Enter a valid line pool access code.

You have attempted to redirect a line, but
someone else has already redirected that
line. Press

•

OVERRIDE

to override the

previous redirection and redirect the line as
you want.

You can redirect calls only on individual
lines.

Select the line that is used to redirect calls
out of the system.

Press the lines to be redirected. To undo a
line selection, press it again. Press

ALL

redirect all your lines.

Continue to press the lines to be redirected.
Press

when you are

finished.

The line you are attempting to redirect
cannot be redirected because the hardware
does not support redirection.

No line to use

Outgoing line

Pool code: ___
QUIT

Redir by 221
OVERRIDE

Redirect denied

Select line out
QUIT

Select line(s)
QUIT

ALL

Select line(s)

ALL

Unequipped line

p0881591.book Page 91 Wednesday, August 19, 1998 6:43 PM