Nortel Networks Modular ICS 4.0 - Manual (Page 195)

Using System features / 183
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Programmed Release
ƒ•°·
The Programmed Release feature performs same function as
® in a programmed dialing sequence. When the system
encounters Programmed Release in a dialing sequence, it stops
dialing and hangs up the call.
The Programmed Release symbol (fi) takes up two of the 24
spaces in a programmed dialing sequence.
The system ignores any digits or commands that follow a
Programmed Release in a programmed dialing sequence.
Run/Stop
ƒ•·
Run/Stop inserts a break point into a sequence of dialed
numbers or characters used for automatic dialing. This may be
necessary when you are connecting to a PBX or similar host
system.
For example, you can call a company with an automated
attendant that instructs you to dial the internal number you
need. You can program the company number, a Run/Stop,
then the internal number on one external autodial button. Press
the autodial button once to dial the company number. When
you hear the automated attendant, press the autodial button
again to dial the internal number.
The Run/Stop symbol (fl) uses one of the 24 spaces in an
autodial or speed dial sequence.
You can include up to three Run/Stop commands in a dialing
string. The system ignores a fourth Run/Stop, and any digits or
commands that follow it in a programmed dialing sequence.
p0881591.book Page 183 Wednesday, August 19, 1998 6:43 PM