Nortel Networks Modular ICS 4.0 - Manual (Page 203)

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
General System features
The following features are available for the entire Norstar
system.
Set profile
Set profile allows you to view but not change the programming
settings for each Norstar set. You can access Set Profile from
any M7310 or M7324 telephone, even while you are on a call.
1. Press
ƒ••Н‰К.
2. Enter the internal number of the telephone whose
programming you want to review.
3. Use BACK, SHOW and NEXT to navigate through the settings.
Line profile
Line profile allows you to view but not change the
programming settings for each Norstar line. You can access
Line Profile from any M7310 or M7324 telephone, even while
you are on a call.
1. Press
ƒ••ÒȈ‰.
2. Enter the number of the line whose programming you want
to review.
3. Use BACK, SHOW and NEXT to navigate through the settings.
Pulse or tone dialing
If your external lines use pulse dialing, you can switch
temporarily to tone dialing to communicate with devices such
as answering machines, to access the features that PBX
systems may offer, or to use another Norstar system remotely.
Press
£ while on an active line. Once you hang up, your
telephone returns to pulse dialing.
p0881591.book Page 191 Wednesday, August 19, 1998 6:43 PM