NComputing PC Expanion L120 - Manual (Page 60)

8-19
Select the host PC that is connected to
the PC Expanion in the “UTMA/UTSA-
Server Connection list” and then click
the button. 3
Select ‘Use auto logon’ in the ‘Connection Information Settings’
screen. Be sure to enter your ‘User Name’ and ‘Password’ and click
the button. The Auto Logon function is only allowed on the
NCT-2000-XP console because the password is saved in the user
personal profile managed by the host computer and the PC
Expanion cannot manage this information. Therefore, this function
setting is allowed on a host computer. 4
In order to save the changed option, the PC Expanion must be
restarted. Click the button in order to restart the PC Expanion. 5
If the user uses the specific PC Expanion, the right figure appears
like as the right window. If when the user clicks the button,
the PC Expanion will be restarted. However the present
environment is saved. Therefore if the same user logs on again,
the environment will be loaded.
Note
If the specific PC Expanion is turned off or there is no the PC
Expanion on the network, the follwing image will appear. Click
the button.
Select the specific host PC in the connection list on the startup
screen of the PC Expanion. If the ‘Autodetection’ is disabled and
‘TS 2’ or ‘TS 3’ is enabled, ‘TS 2’ or ‘TS 3’ will be displayed in the
connection list. 6
Click the button. 7