NComputing PC Expanion L120 - Manual (Page 10)

1-2
System Minimum Requirement
The minimum hardware requirements
To connect one PC EXPANION terminal to a single host PC,
the following system requirements apply :
Intel Pentium 4 1.3 GHz processor with at least 512 MB RAM or higher.
To connect two to three PC EXPANION terminal(s) to a single host
PC, the following system requirements apply :
Intel Pentium 4 2.4 GHz processor with Hyper - Threading
technology with at least 512 MB RAM or higher.
To connect four to seven PC EXPANION terminal(s) to a single host
PC, the following system requirements apply :
Intel Pentium 4 3.0 GHz processor with Hyper - Threading technology
with at least 1024 MB RAM or higher.
To connect eight to ten PC EXPANION terminal(s) to a single host PC,
the following system requirements apply :
Intel Pentium 4 3.2 GHz processor with Hyper - Threading technology
with at least 2048 MB RAM or higher.
To connect 10-15 PC EXPANION terminal to a single host PC,
the following system requirements apply :
Intel Pentium 4 or Xeon 3.0 GHz processor with at least 3 GB RAM or higher.
To connect 16-20 PC EXPANION terminal(s) to a single host PC,
the following system requirements apply :
Intel Pentium 4 or Xeon 3.2 GHz processor with Hyper - Threading
technology with at least 4 GB RAM or higher.
To connect 20-25 five PC EXPANION terminal(s) to a single host PC,
the following system requirements apply :
Intel Pentium 4 or Xeon 3.4 GHz processor with Hyper - Threading
technology with at least 5 GB RAM or higher.
To connect 26-30 PC EXPANION terminal(s) to a single host PC, the
following system requirements apply :
Intel Pentium 4 or Xeon 3.6 GHz processor with Hyper - Threading
technology with at least 6 GB RAM or higher.
Do not use a notebook PC as a host PC. Using notebook PCs causes
power management and memory problems. Notebooks use
power-saving features and different technologies than a typical
desktop PC.
We recommend a 60GB and 7200rpm or higher hard disk drive.
Note