NComputing PC Expanion L120 - Manual (Page 18)

3-2
Connecting by Using a switch (Supports 100Mbps
switching)
To connect by using a switch, you need to set a static IP address on both
the PC Expanion terminal and the host PC.
To configure an IP address as static, follow these steps :
Turn on the PC Expanion. 1
Click the button on the
startup screen of the PC Expanion. 2
Select the ‘Network’ tab. Then select ‘Use Static IP address’ option.
Type the IP address and the gateway. And then Click the
button. (If you do not know them, please contact a network
administrator.) 3
With the L120 and L200 models, the list of host computers is displayed in
the startup screen of the PC Expanion. The other models list the host
computers when a user clicks the “Connection to” drop-down list. If the
user clicks on either within or within
after selecting “Autodetection”, the host computer name is
displayed automatically. Click the button. Start using the PC
Expanion. 4