NComputing PC Expanion L120 - Manual (Page 46)

8-5
2. How to check the IP address setting on the PC
Expanion
How to check the IP address on the PC Expanion.
Click the button or of button of
startup screen of PC Expanion. 1
Select the ‘Network’ tab.
To use an automatically allocated IP address, select ‘Obtain an IP
address automatically.’ This option is available only when your
network provides DHCP functionality. If DHCP is not supported,
you have to configure the IP address manually. To setup the IP
address manually, select ‘Use Static IP address,’ enter an IP address
in the IP address field, and enter the IP address of a gateway in the
Gateway field. For the correct IP address and the IP address of the
gateway, ask your computer administrator. 2
How to check the IP address and the gateway in the NCT-2000-XP program
Click the button or of to check the IP address
and the gateway of the PC Expanion. 3
Select the
XP Console> Select Select
. You can confirm the IP address of the
corresponding station in the device list. The view item of the device list
is set to ‘Network’ by default. If this item has been changed, click the
button, select ‘Network’ and click the button to confirm
the IP address.
1