NComputing PC Expanion L120 - Manual (Page 56)

8-15
Input the IP address of the host PC in
the “Terminal Server network address”
column of the “Edit Connection Profile”
window. Then click the button. 4
Click the button or the button in order to save the
changed option. The user must restart the PC Expanion. Please click
the button in order to restart the PC Expanion. 5
If the PC Expanion is currently being connected and used, a warning
message appears. If you click the button, the PC Expanion
restarts. However, since the current environment settings are
unchanged, you can use your environment settings when you
logon with the same user account even after restarting.
If the PC Expanion is turned off or does not exist in the same sub-
network, the following screen appears and the settings will not be
changed. In this case, click the button to cancel the changes.
Note
Click the arrow in the PC Expanion initial screen and select a
host computer from the list. If ‘Autodetection’ is not selected and ‘TS 2’
or ‘TS 3’ is selected, ‘TS 2’ or ‘TS 3’ appears on the list. 6
When the Windows logon window appears, type the user ID and
password. 7