beautypg.com

Setting up network configuration part 3 – NComputing PC Expanion L120 User Manual

Page 17

background image

3-1

Setting up Network configuration

Part 3

You need to configure the network to connect with any PC Expanion
terminal(s). To configure your computer's network configurations, please
refer to the following :

Connecting to the network by using a cable or DSL
router

If you use a Cable/DSL router, you can use dynamic IP addresses. (To use
dynamic IP addresses, the router must support DHCP or a dynamic IP
address allocation function) If you want to use static IP addresses when
using a Cable/DSL router, refer to “Connecting by using a switch.”

Turn on the PC Expanion.

1

Click the button on the startup screen of the PC Expanion.

2

With the L120 and L200 models, the list of host computers is
displayed in the startup screen of the PC Expanion. The other
products require using the “Connection to” drop-down list. If the
user clicks either within or
within after selecting “Autodetection,” the host computer
name is displayed automatically. The name of the host computer
will be displayed for up to 8 host computers. Click the
button. Start using the PC Expanion.

4

Select the ‘Network’ tab. Then Select ‘Get Dynamic IP address’ and
click the button. (The PC Expanion uses the “Get Dynamic IP
address” option as the default. No additional settings are required.)

3

This manual is related to the following products: