NComputing PC Expanion L120 - Manual (Page 54)

8-13
Click the button. 2
Select ‘Advanced’ tab. Check “Allow other network users to connect
through this computer’s Internet connection” in the Internet
Connecting Sharing window and click “OK” button. 3
Click the button. 4
Click the button in the startup screen of the PC Expanion. 1
6. How to connect to the specific host PC
Select the ‘TS Options’ tab, select ‘TS 2’ or ‘TS 3’ and click the Disable> button. Click the button and setup host computer
information. If ‘Autodetection’ is selected, up to 8 host computers within
the same sub-network of the NCT-2000-XP application are automatically
found and listed. Automatically found host computer names are marked
by the‘*’ symbol in front of them. If ‘Autodetection’ is not selected and
‘TS 2’ or ‘TS 3’ is selected, ‘TS 2’ or ‘TS 3’ appears in the list without the ‘*’
symbol. 2