NEC UNIVERGE NEAX 2000 IPS - Manual (Page 85)

Chapter 4 Equipment List
UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide Page 4-13
Issue 6
Line/Trunk (LT) Cards (Cont.)
Function Name Port Remarks
Wireless Zone
Transceiver
interface
SPN-4CSIA
16
4-circuit CS interface for U-interface ZT.
Two slot card, 16 LT ports. The PZ-PW122 is
required.
Fiber Optical PN-M10 0
Optical Fiber Interface Card:
Provides optical fiber interface for T1/E1 Digital
Trunk Interface (1.5 M/2 Mbps) or Remote PIM.
Line length: 10 km (6.2 miles) or less. Line
coding: CMI.
PN-RTA 0
In-Skin Router Card
10/100BASE-TX:1, 10BASE-T:1, RS2332C(D-
sub 9pin)
Maximum 8 cards per PIM
PZ-M649 0
T1 Digital Trunk Interface (1.5Mbps) Card
Mounted on PN-RTA Card
Provides a built-in CSU.
In-Skin Router
PZ-M623 0
Ether Control Card
Mounted on PN-RTA Card
Provides one additional 10BASE-T port
PZ-VM07 4/8
4 or 8 Port Voice Mail card (NEAXmail IM-16LX)
This card can provide up to 16 ports of digital
line circuit interface.
Occupies VM slot and up to one LT slot
One card per PBX is available.
NEAXmail IM-16LX
PZ-VM08 8/16
4 Port Voice Mail card used to expand from 8 to
16 ports. Provides one connector for
Occupies VM slot plus and one LT slots
External Relay
Control
PN-DK00 0
External Relay Contact Control/Scanning
(8-circuit/card)
Works in either mode:
Control Scanning
8-circuit
0-circuit
4-circuit 4-circuit
0-circuit 8-circuit