This feature protects a call from being tapped – NEC UNIVERGE NEAX 2000 IPS User Manual
Page 195

 Chapter 9 Descriptions 
 
 
UNIVERGE
NEAX
2000 IPS
Request for Proposal (RFP) Reference Guide
Page 9- 49
Issue 6
PS Authorization
This feature is to confirm the identity of a 
Dterm PS III to avoid an unauthorized Dterm 
PS III from accessing the system. 
 
PS Location Indication
When a Dterm PS III calls a Multiline 
Terminal/Attendant Console or vice versa, this 
feature allows to indicate the location name of 
the ZT II that is connected to the Dterm PS III 
on the LCD of the Multiline terminal. 
PS Location Registration
This feature allows the IPS-WCS to supervise 
the location of each Dterm PS III, upon 
receiving the location registration request, to 
allow call termination. 
 
Q931a Roaming Over IP Trunk
Dterm PS III user can originate or receive a 
call in any place of a network provided by 
multiple PBXs, which are interfaced by JT-
Q931-a protocol over IP Trunks. 
Radio Channel Changeover
This feature is to supervise and changeover 
the channel automatically to avoid the 
interference and to maintain the speech 
quality. 
 
Short Message Notification (OAI)
This feature enables a Short Text Message 
(STM), once arrived at a mail box of the STM 
Server (external equipment), to be 
automatically distributed to the addressee 
Dterm PS III via Open Application Interface 
(OAI). This feature also provides “TM Full” 
notification on the display (LCD) of the 
address D term PSII that is busy. If the Dterm 
PS III is out of zone, the feature makes 
retransmission of the STM after the PS 
returns to the zone. 
 
 
Soft Phone Wireless Handset
This feature allows a Soft Phone (Dterm 
SP30) user to use a PS terminal as the 
handset of the Soft Phone. The user can 
select a handset (Soft Phone Handset or PS) 
by pressing the Handset Switch key on the 
Soft Phone. 
Speech Encryption
This feature protects a call from being tapped.
Speed Dial-PS
This feature allows a Dterm PS III user to dial 
the certain frequently called numbers using 
two-digit abbreviated call codes. 
Station Hunting - Not Available
This feature allows a call placed to a Dterm 
PS III station, which is out of zone or power 
off to be forwarded to an idle station in a hunt 
group. Two Station Hunting arrangements are 
available. Station Hunting - Circular processes 
the call regardless of which station in the hunt 
group is called. Station Hunting - Terminal 
initiates a hunt only when the pilot number of 
a hunt group is called. 
Voice Mail Indication
When a message is mailed in the Dterm PS 
III, an indication of the envelope icon is 
displayed in the LCD of the Dterm PS III. 
WLAN Handset Registration/Service
This feature allows the 2000 IPS to 
accommodate the WLAN Handset as a 
station. A terminal is connected to the 2000 
IPS through Access Point and Gateway and 
operates under the control of the virtual CS on 
the Gateway. Station-to-Station calls between 
WLAN stations and calls between WLAN 
stations and existing stations/trunks are 
available. 
