NEC UNIVERGE NEAX 2000 IPS - Manual (Page 332)

Chapter 16 Wireless System
Page 16-10 UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
Issue 6
Group Call - 2
Way Calling
This feature permits a Dterm PS III/Dterm /Single Line Telephone
can page a maximum of fifteen parties simultaneously except the
group call leader. After one of paged parties answers, the paging
becomes the 2 Way Calling between the leader and the first
answered party, and paging other parties stops automatically. The
PSs are assigned to the simultaneous paging group as participants
by the system data beforehand.
Handover
When the signal transmission quality becomes inferior, a Dterm PS III
re-originates a call automatically and seizes another radio channel,
making the WCS handover the call to another zone transceiver to
maintain the speech quality.
Individual PS
Calling This feature allows the calling party to page the individual Dterm PS
III.
Last Number
Redial – PS
This feature enables a Dterm PS III to store the numbers dialed in the
previous five calls including the last number dialed. The stack dial
numbers are sequentially displayed on the LCD, allowing the station
user to make an out-going call by selecting the desired dialed
number from the display.
Multi-Line
Operation – PS
Dterm PS III equipped with two line keys, L1 key and L2 key, and
different station numbers can be assigned to each of two lines. The
number assigned to L1 key of the PS is called My Line and the other
number assigned to L2 key is called Sub Line. My Line and Sub Line
of a Dterm PS III can be assigned to appear on the Flexible Line
Keys of a Dterm and the Dterm can share the Dterm PS III lines.
Multi-Site
Roaming
Dterm PS III users can originate or receive a call in any place of a
network provided by the multiple PBXs that are interfaced by JT-
Q931a.
U NIVERGE
NEAX 2000 IPS
Wired for
Wireless
This feature allows the U NIVERGE NEAX 2000 IPS to have the
Wireless PBX feature. U NIVERGE NEAX 2000 IPS provides several
integrated features adding on the adjunctive configuration.
Number
Sharing
This feature allows the Dterm user to have a Dterm PS III as Sub
Station and to get service with one telephone number. In case that
one user has both Dterm and Dterm PS III, with this feature used, the
user is not required to have separate two telephone numbers.
When user is at his desk, a call is terminated to Dterm.
When user leaves his desk with Dterm PS III, a call is
automatically terminated to Dterm PS III. In this feature, the
Dterm and Dterm PS III are referred as Main Station and Sub
Station, respectively.