NEC UNIVERGE NEAX 2000 IPS - Manual (Page 159)

Chapter 9 Descriptions
UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide Page 9- 13
Issue 6
Call Park - Tenant
When a call is parked by Call Park - Tenant, the
call can be retrieved from Call Park-Tenant by any
station within the tenant from which the call was
originally parked.
Call Pickup
This feature enables a station user to answer
any call directed to another station, to a
station within the user's own Call Pickup
Group, or to a station within a different Call
Pickup Group. Three Call Pickup methods are
available: Call Pickup - Direct, Call Pickup -
Group, and Call Pickup - Designated Group.
Call Pickup - Direct
This method permits a station user to pickup a call
to any other station in the system by dialing a
specific Call Pickup feature access code and the
number of the called extension.
Call Pickup - Group
This method permits a station user to answer any
calls directed to other extensions in their preset
pickup group by dialing a Call Pickup - Group
feature access code.
Call Pickup - Designated Group
This method permits a station user to answer an
incoming call directed to another group by dialing
the Call Pick-up - Designated Group feature
access code and any station within the group to
which the ringing station belongs.
Call Redirect
Without answering incoming calls or held calls
that terminate to the line keys of a Multiline
Terminal, the calls can be transferred to a pre-
programmed station or Voice Mail System.
Two transferring destination number can be
designated per tenant, in system data
programming. This feature can be used
together with the Caller ID Display feature.
Call Transfer
This feature permits a station user to transfer
a call to another station in the system directly,
or with assistance from the attendant.
Call Transfer – All Calls
This feature permits a station user to transfer
incoming or outgoing calls to another station within
the system without attendant assistance.
Call Transfer – Attendant
This feature permits a station user, while
connected to an internal or outside call, to signal
the Attendant and have the Attendant transfer the
call to another station within the system or to an
outside connection.
Caller ID Class
This feature receives the calling subscriber’s
name and number sent from a public network
using a MODEM signal and displays the name
or number on an LCD of a Multiline Terminal
and Attendant Console.
Caller ID Display
Without answering incoming calls or held calls
which terminate to the line keys of a Multiline
Terminal, the calling party's information can
be confirmed by the indications on the LCD.
Caller ID Station
This feature enables a user to connect an
analog telephone with Caller ID display
function, and provides the calling party’s
number and name on the display without
answering incoming calls.