NEC UNIVERGE NEAX 2000 IPS - Manual (Page 151)

Chapter 9 Descriptions
UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide Page 9- 5
Issue 6
Business/Hotel/Data Feature Descriptions
Account Code
This feature, when used with Station Message
Detail Recording (SMDR), allows station
users and Attendants to enter a cost
accounting or client billing code (up to 16
digits) into the system.
Add-On Module
This feature allows the Add-On Module to be
combined with a legacy Multiline Terminal
when there are insufficient line or trunk keys
provided at the Multiline Terminal. When the
DCU-60-1 unit keys are programmed as
line/trunk keys, the additional 25 lines/trunks
and the existing lines/trunks set for the
Multiline Terminal can be accessed directly
(maximum of 49 lines/trunks). The station
speed dialing function can be assigned for all
keys on the DCU-60-1 unit. Also, one of the
last 3 keys can be used as a Day/Night
change key.
Alarm Indications
Faults are indicated by the Major/Minor
(MJ/MN) lamps located on the AC/DC Power
Supply and, optionally, an external alarm
display unit.
Alphanumeric Display
The DTR-16DC-1 Multiline Terminals are
each equipped with a 3-line, 24-character
Liquid Crystal Display (LCD). These displays
are used to provide alphanumeric information
including clock/calendar and call processing
information.
Station Application All Multiline Terminals with
an LCD display.
Analog Port Adapter
This feature allows an APR-U/AP(R)-R or
APA-U/AP(A)-R unit combined with a legacy
Multiline Terminal to connect to an analog
terminal such as an analog telephone,
Modem, and PC with built-in Modem. There
are two communication modes for the
terminal connected via the Analog Port
Adapter as shown below:
1. Single Port Mode
A Multiline Terminal and an analog terminal share
the same port. In this mode, the Multiline Terminal
and the analog terminal cannot be used
simultaneously
.
2. Dual Port Mode
A Multiline Terminal and an analog terminal use
different ports. In this mode, the Multiline Terminal
and the analog terminal can be used
simultaneously.
Announcement Service
This feature allows station users to record
messages on Digital Announcement Trunk
(DAT) cards. When a station user dials the
feature access code for this feature, the user
receives the corresponding message from the
system.
Answer Key
An Answer Key is provided on all Multiline
Terminals. The Answer Key can be used to
answer incoming calls on outside lines, and
primary or secondary extensions. When the
Answer Key is used to answer an incoming
call with a call in progress, the first party is
placed on hold and the second party is
connected. If the Answer Key is depressed
while in a three-party call, the user can
alternate between each party and a Broker's
Call is established.