NEC Express 5800/320Lb - Manual (Page 288)

8-46
N8104-84 1000BASE-SX Adapter
Consult your sales personnel for details when purchasing this hardware.
IMPORTANT: Note the following about this product:
It is advisable to add this product to such environment that each system is used for a different
purpose (ex. system line, maintenance, monitoring) and multiple accesses do not occur
simultaneously.
If there are multiple accesses, the processing power and transmission speed may be somewhat
affected.
This product may require the revision of software and hardware in some cases. Ask your sales
agent.
Slots to install the board
PCI slot
Group 1 Group 2 N code Name
#1 #2 #3 #1 #2 #3
Remarks
N8104-84 1000BASE-SX Adapter – √ √ – √ √ Each PCI module
can contain one
board only.
√: Can be installed. –: Cannot be installed.
About network setting
Make settings of the network after installing the N8104-84 1000BASE-SX connection
board and starting the system. For the setting procedure, see “Configure expanded LAN
board” described later, or “Set Dual LAN Card Configuration” in the separate volume of
User’s Guide (Setup).
IMPORTANT:
Insert the N8104-84 1000BASE-SX connection board after the installation of the OS
is completed. Use the N8104-84 1000BASE-SX connection board in pairs. Insert one
into a slot in a PCI module and the other into the slot at the same location in the other
PCI module.
The 1000BASE-SX (N8104-84) and the 1000BASE-T (N8104-103) cannot coexist.