NEC Express 5800/320Lb - Manual (Page 164)

5-36
Maintenance of NEC Express5800/ft series
NEC Express5800/ft series maintenance can be done in two ways; one is to use NEC ESMPRO
Manager for remote maintenance and the other is to use the NEC ESMPRO Agent ft server utility
on the NEC Express5800/ft series for local maintenance.
TIPS: The following explains how to start NEC ESMPRO Agent ft server utility installed on
NEC Express5800/ft series.
1. Move to the location where NEC ESMPRO Agent is installed.
If the installation destination is not specified, /opt/nec/esmpro_sa is the destination.
In this description, /opt/nec/esmpro_sa is assumed as the installation destination.
2. Move to the location where ft server utility is stored.
cd bin
3. Start the tool.
./ESMftcutil
The maintenance functions that can be executed from NEC ESMPRO include three types, those
common to all components, those specific to particular components, and general system settings.
The maintenance functions common to all components are operated in the same way basically (the
operation procedure and typical examples of screen images are described below).
The table below lists the maintenance functions common to all components.
Start Stop
MTBF
clear
Diag-
nosis
F/W
update Component
R L R L R L R L R L
CPU module √ √ √ √ √ √ – – – √
PCI module √ √ √ √ √ √ – – – –
PCI slot – – – – – – – – – –
Ethernet adapter – – – – √ √ – – – –
SCSI adapter – – – – √ √ – – – –
SCSI enclosure – – – – √ √ – – – –
SCSI electronics – – – – √ √ – – – –
SCSI slot – – – – √ √ – – – –
R: Remote. Executable from remote management PC by using NEC ESMPRO
Manager
L: Local. Executable on local server by using ft server utility
√: Support
–: Not support