NEC Express 5800/320Lb - Manual (Page 194)

6-2
DAILY MAINTENANCE
To use your NEC Express5800/ft series in best condition, check and maintain regularly as described
below. If an error is found on your NEC Express5800/ft series, consult your sales agent.
Checking Alert
Monitor the failure occurrence by NEC ESMPRO during the system operation.
Always check whether any alert is reported to NEC ESMPRO Manager on the management PC.
Check whether any alert is reported on the Operation Window, Data Viewer, or Alert Viewer of
NEC ESMPRO Manager.
Viewers of NEC ESMPRO
Operation Window Alert Viewer
Data Viewer
Checking STATUS LEDs and LCD Display
Check the LED indication on the front of the NEC Express5800/ft series, on hard disks installed in
3.5-inch device bay, or on LCD display when the server is powered on or powered off by the shut
down operation. The functions and indications of LEDs are described in Chapter 2. If any indication
that shows an error, contact your sales agent.