NEC Express 5800/320Lb User Manual
Page 277
8-35
111.
Close the release lever.
IMPORTANT:
Unless the release levers are located inside the rack frame, the
module won’t be mounted correctly.
112.
Screw the release levers.
113.
Boot the installed PCI module.
The system is defaulted to automatically boot the PCI module, once installed. If this
feature is disabled, boot the PCI module using the ft server utility of the NEC ESMPRO
Agent installed to the server or the Data Viewer of the NEC ESMPRO Manager.
For more information, see "NEC ESMPRO Agent and Manager" - "Maintenance of NEC
Express5800/ft series" in Chapter 5.
NEC ESMPRO Manager
Select [FTServer]
→ [PCI Module] → [(installed)
PCI Module]
→ [Maintenance] → [Bring Up/Bring
Down]
→ [Bring Up].
ft server utility
Select [ft server]
→ [PCI Module] → [(installed)
PCI Module]
→ [PCI Module Start/Stop] → [Start].
Correct
(The hook is located
behind the frame)
Wrong
(The hook is located
before the frame)
Release lever