NEC Express 5800/320Lb User Manual
Page 186
5-58
Remote Management Configuration for the Server without Console
If the main unit does not have a console such as keyboard, you can operate tools on the server
remotely using MWA’s remote console functions and NEC EXPRESSBUILDER’s consoleless
functions.
There are two ways of remote console connection depending on the condition of connection
between the management PC and the main unit:
Connect from the management PC linked to the main unit through LAN.
Connect from the management PC directly linked (through Serial port B) to the main unit.
Connect from the Management PC Linked through LAN
On the management PC that is linked through LAN, perform the steps below:
97.
Start the management PC where MWA is installed. From the Start menu, select [Program]
→ [NEC MWA] → [MWA].
When MWA starts, the initial screen “Remote Control Manager” will appear.
98.
Insert a formatted 1.44MB floppy disk into the drive.
99.
From MWA’s [File] menu, select [Configuration] command to open [Configuration]
dialog box.
100.
Select [New] to display the [Select a model] dialog box.
101.
Check [Write to FD] and select an applicable model to open [Configuration for ft Series]
dialog box.
Ex) The model name is printed on the front cover like “NEC Express5800/320Lb,” or
“NEC Express5800/320Lb-R.”