NEC Express 5800/320Lb User Manual
Page 127
4-43
How to Clear Passwords
36.
Power off NEC Express5800/ft series and unplug the both power cords.
37.
Remove the both PCI modules (#1 and #2) from the NEC Express5800/ft series (see page
8-31 “Removing PCI Module”).
38.
Open the top cover of the PCI Module #1.
39.
Make setting of jumper switch for clearing the password.
Remove the clips from the jumper pins 11-12 and place them on the jumper pins 3-4 on
the PCI Module #1.
40.
Mount the PCI Module #1 to NEC Express5800/ft series (see page 8-33 “Installing PCI
Module”).
41.
Plug the both power cords and when the POWER Switch LED turns on, press it to power
on NEC Express5800/ft series.
42.
When the following POST screen appears after the startup, press the POWER Switch to
turn off the power.
43.
Unplug the both power cords.
44.
Remove PCI Module #1 from NEC Express5800/ft series (see page 8-31 “Removing PCI
Module”).
45.
Reset the jumper switch setting.
Remove the clips from the jumper pins 3-4 and place them on the jumper pins 11-12 on
the PCI Module #1.
TIPS:
If you place it on other pins, the server may malfunction.