Linux error messages – NEC Express 5800/320Lb User Manual
Page 225

7-21
Linux Error Messages
NEC Express5800/ft series displays messages on the console window when failures occur. Also, the
same information is recorded as system logs.
The following indicates the syslog messages, messages on the console, their meanings and actions:
Message Meaning
Action
FT[dev.no] opstate SIMPLEX to DUPLEX
The status changed
from SIMPLEX to
DUPLEX
FT[dev.no] opstate ONLINE to DUPLEX
The status changed
from ONLINE to
DUPLEX
FT[dev.no] opstate INITIALIZING to DUPLEX
The status changed
from INITIALIZING to
DUPLEX
FT[dev.no] opstate BROKEN to DUPLEX
The status changed
from BROKEN to
DUPLEX
FT[dev.no] opstate INITIALIZING to
DIAGNOSTICS
The status changed
from INITIALIZING to
DIAGNOSTICS
FT[dev.no] opstate INITIALIZING to ONLINE
The status changed
from INITIALIZING to
ONLINE
FT[dev.no] opstate ONLINE to INITIALIZING
The status changed
from ONLINE to
INITIALIZING
FT[dev.no] opstate DIAGNOSTICS to
DIAGNOSTICS_PASSED
Diagnostics have
completed
FT[dev.no] opstate UNKNOWN to INITIALIZING
The status changed
from UNKNOWN to
INITIALIZING
The server is
operating
normally.
FT[dev.no] opstate SIMPLEX to BROKEN
The status changed
from SIMPLEX to
BROKEN
FT[dev.no] opstate UNKNOWN to EMPTY
The status changed
from UNKNOWN to
EMPTY
Contact your
sales agent.
FT[dev.no] opstate INITIALIZING to BROKEN
Failed to start the
device
Start the server
again. If the
problem persists,
contact your sales
agent.
FT[dev.no] operation BRINGUP failed
Failed to start the
device.
Start the server
again. If the
problem persists,
contact your sales
agent.