NEC Express 5800/320Lb - Manual (Page 179)

5-51
Procedure in the ft server utility
82. On the main window of the ft server utility, select the target component.
The screen of the target component appears.
83. Check the current status of the target CPU module with the LEDs.
84. Select the dump acquisition method on [Dump] of the CPU module screen, and click
[Execute].
A certain time is required for the dump acquisition. The dump is stored to the system
defined location on the server.
The result of the dump acquisition can be registered in the syslog.
85. Start the component.
Sample screen of ft server utility
Main window
[CPU] module screen